Siemens S30810-Q2096-X100 DIUS2, Перестроенный
Похожее изображение
The DIUS2-module board S30810-Q2096-X100 (Digital Interface Unit ISDN) is intended for the Siemens Hicom 300 and HiPath 4000. The module board has a digital S 2-interface for China. The device enables two Primary-Access-(PMA)-interfaces S 2 according to CCITT:
- Incoming line-signals on line 0 and 1. Transmission-rate: 2048 kbit/s, Coding: HDB3
- Outgoing line-signalson line 0 and 1 (line 1 and 2). Transmission-rate: 2048 kbit/s, Coding: HDB3
- Every line-signal on the lines has 30 B-channels, 1 D-signalizing-channel and 1 synchronizing-channel per plug
Specifications:
- Interface:
- S 2M = Trunk interface
- Da 2M = digital vertical line (public)
- S 2 = digital vertical line (private) for the connection to HOST, SERVER,GATEWAY
- Range 6 dB
- Transmission bandwidth 2 x 2048 kbit/s (2 HWYs), consisting of 30 B-channels, 1 signalizing-channel (D-channel) and 1 synchronizing-channel with 64 kbit/s
- Statistic for layer-2-protocol on the S 0/S 2-interface
- Offers via the clock generator of the system a reference clock, which is derived from one or both line signals
- Adapter-plug for electric or optical transmission lines
The adapter-plug is not included, please order seperately!
Compatible to the following systems:
- Hicom 300E
- Hicom 300H
- Hipath 4000 up to software-version V5.0
- Do NOT operate in combination with the CSPCI-control!
Состояние товара "Перестроенный"
Товар был в употреблении, прошел полную техническую проверку и тщательный контроль качества.
Категория товара
Этот товар Вы найдете в следующих категориях: